Role of Automotive Industry in Global Warming

Global Warming and Automotive Industry

  • Shahid Hussain Abro Department of Materials Engineering, NED University of Engineering and Technology, Main University Road, Karachi, Pakistan
  • Alidad Chandio Department of Metallurgical Engineering, NED University of Engineering and Technology, Main University Road, Karachi, Pakistan
  • Iftikhar Ahmed Channa Friedrich University of Erlangen Nuremberg, Germany
  • Abdulaziz S. Alaboodi Department of Mechanical Engineering, Qassim University Kingdom of Saudi Arabia
Keywords: global warming, CO2 emission, light weight, low fuel consumption, grain size.

Abstract

Global warming and air pollution by human made gases such as CO2, is mainly produced by automotive industry that results in great risk for human health. The aim of this study is to reduce the above problem by using the high strength materials with low density in the manufacturing of automotive vehicles. An approach applied here is to enhance the strength by reducing the grain size, lowering the density and increasing elongation. Four steel samples with different chemical compositions were selected. Samples were heat treated from 850 °C to 1250 °C and cooled in water. Grain size distribution was calculated using matrox inspector software and result was plotted using origin. It was found that 850 °C has lowest and 1250 °C has highest grain sizes. Strength of steel can be increased not only by adding the alloying elements but also by controlling grain size. Light weight material consumes lower fuel and emits lower CO2, thus it minimizes the global warming and air pollution.

 

Published
2019-11-28